Product Categories
Business Community
i am taking over a controller from another department, and it was poorly managed. The devices on the controller were all out of date and needed a firmware update. 840 gateways and switches, 391 APs, m
ControllerFirmware Update
By
Tundah
· Latest post an hour ago
0Helpful
11Views
Hello everyone, we are using Omada in a professional MSP context to manage customer environments with 20+ switches per site. Our main use case – and honestly one of the biggest reasons we chose Omada
VLAN & Multi-NetworksConfigurationController
By
MW_FIS
· Latest post 9 hours ago
0Helpful
23Views
Good day. Just a brief post on something we ran into while setting up Omada SDN in a Hot-Standby Backup configuration. Installed SDN 6.1.0.19 on two nodes: One directly into the OS on a Dell 9020 and
Controller
By
clangren
· Latest post 21 hours ago
0Helpful
31Views
Hello, I am running a small machine shop, and recently I've realized that our captive portal is no longer working. At least it's not working in the sense that I expect it to. I am using the Festa clou
By
Jonathan-D
· Latest post an hour ago
by NeilR_M
0Helpful
61Views
I configured a Wireguard VPN between two ER605 site-to-site devices, but I realized, or at least couldn't find, a way to choose a default route for the ER605 from the branch office to connect to the m
VPNWAN SetupRoutingWireGuard
By
fabio_brandao1
· Latest post Yesterday
by fabio_brandao1
0Helpful
54Views
I have an Omada ER605 (hardware v2.20) running firmware 2.3.3 (Build 20251029 Rel.18054). I’m using Dual-WAN with load balancing and link backup/failover. WAN1 (Vivo) works normally, but WAN2 (WAN/LAN
By
CelsoJunior
· Latest post 8 hours ago
by Hank21
0Helpful
52Views
Hi everyone, I am reaching out to the community because my topology display issue remains unresolved, even after migrating to the latest controller version (v6.1.0.19). The issue : On several MSP site
ControllerVLAN & Multi-NetworksTopology
0Helpful
44Views
The Switch crashes once per week rendering it unaccessible via omada controller. Attached devices work partially. L3 Features stop working. Sometimes even the switch chip gets stalled leaving ports in
Network ConnectivityVLAN & Multi-NetworksTopologyHealth
0Helpful
62Views
hi all, in reference to my previous post I would like to place following request to fix inconsistencies in event log: Gateway OpenVPN Module Information: in the event log the login/logoff information
controller event log
By
ZoloNN
· Latest post Yesterday
0Helpful
27Views
There is something terribly wrong with the forum, posts come and go, I have to constantly press the refresh button, there have also been major problems all week, the entire forum was offline for many
0Helpful
46Views
I have a ER605 gateway with a OC300 controller and multiple EAPs. I have a 1gig down/up fiber connection with supplied modem from our Internet provider. I don't seem to have any issues with my compute
RoutingNetwork ConnectivityFirewallDNS
0Helpful
33Views
I have wireguard configured on the gateway acting as a VPN server. The "Local IP Address" on the gateway's wireguard config (10.16.16.1) is set to a subnet unused by any of the existing VLANs. There i
VPNRoutingWireGuard
0Helpful
57Views