Camberwell.intl | Instagram, TikTok | Linktree

ALP4 Magnetic Controller Cases

Car-Wash Brush Cover

Key Features: + Large Integrated magnetic steel plate The steel plate for the magnet is enclosed in the case! No need to stick or glue anything on the back of your Airlift controller! We also placed the steel plate lower on the holder so that the magnet will be directly behind the controller keypad. This supports the controller better when airing up or airing out! + Supports vertical and horizontal orientation The enclosed case allows the controller to be used vertically or horizontally without falling out of the case! The case is a snug fit but we also include 4 screws to make sure your controller will not fall out. + More protection Burning your hand on a hot controller that’s been sitting in direct sunlight all day is not fun, to say the least. That won’t happen anymore with this Camberwell™ controller case! This case significantly reduces the temperature of your controller after it has been sitting in a hot car all day so that you can hold it without burning your hand! + Wire management clips No more wires getting in the way of your radio, climate control, or shifter! Our new wire management clips fit in between interior panels to clean up your interior and keep wires from getting in your way! (3, 5, or 10 packs of cable guides are available for purchase separately here if needed!) + Wide variety of color choices We’ve added even more color options with this holder while including your favorites from our previous holders as well! *** Due to high demand, please allow 3-5 days for order processing.

Airlift 3P Controller Magnetic Case

Our best selling magnetic controller mounts are now available for Airtekk Stage 2+ controllers! ***These should also fit the Maxload P1 Controllers as well The integrated steel plate allows this case to be used with any magnetic mounts that you may already have or with one of our magnetic mounting options. You have the option to order the case with one of our magnetic mounts (more to come soon!) or no mount if you already have a magnetic mount you would like to use, or if you would just like to have a protective case for your controller.

Airtekk Stage 2+ Magnetic Controller Case & Mount

Our best selling magnetic controller cases are now available for Grinds controllers! The integrated steel plate allows this case to be used with any magnetic mounts that you may already have or with one of our magnetic mounting options. You have the option to order the case with one of our magnetic mounts (more to come soon!) or no mount if you already have a magnetic mount you would like to use, or if you would just like to have a protective case for your controller.

Grinds Magnetic Controller Case & Mount

Our best selling magnetic controller cases are now available for Accuair's Touchpad+! The integrated steel plate allows this case to be used with any magnetic mounts that you may already have or with one of our magnetic mounting options. The case comes with 4 screws to ensure the controller and case are secure You have the option to order the case with one of our magnetic mounts (more to come soon!) or no mount if you already have a magnetic mount you would like to use

Accuair Touchpad+ Magnetic Controller Case

Already have a controller holder and want to change the mounting location? Then this is for you! We have a few different styles of vent clip magnets and our new dash mount magnets available for sale separately here! ***Note: If you order a controller case and select a mount option on the product listing (other than "None"), you do not need to order the mount from this listing. This is only if you would like an additional mount or a different mounting option. We have 5 variants available: Dash Mount V3 Uses 3M VHB adhesive with split, rotating base plates to mount to uneven or transitional surfaces. The extension arm connecting the base to the magnet rotates and swivels to give more flexibility in mounting locations than the V2.1 dash mount. The V3 arm is longer than the V2.1, so keep that in mind if you don't want your controller sticking too far out from the mounting surface. The magnet on the V3 mount is the same as the V2.1 mount. PLEASE READ THE MOUNTING INSTRUCTIONS BELOW AS WELL!!! Dash Mount V2.1 Uses 3M VHB adhesive to mount to your dash or other interior surfaces. *** Please see mounting instructions below!*** This mount contains 6 N45 Neodymium magnets and swivels on a ball joint Vent - Premium This mount clips on your air vent and uses 6 N45 neodymium magnets Vent - Standard Contains 5 N52 neodymium magnets Vent - Basic Contains 4 N52 neodymium magnets (Magnet color may vary) Dash Mount Installation Instructions: This mount works best on flat, smooth, hard interior surfaces. Please make sure your mounting surface is clean and free of any dust, oil, or other debris. IT IS VERY IMPORTANT THAT YOU FOLLOW ALL OF THE SURFACE PREPARATION AND MOUNT INSTALLATION STEPS BELOW! THE MOUNT WILL FAIL IF THIS IS NOT DONE PROPERLY! Step 1: ensure the mounting surface is free of any dust, debris. Use 50% isopropyl alcohol and a microfiber cloth to clean the mounting surface. Step 2: When the surface is dry, remove the film on the adhesive and apply the dash mount. Step 3: Apply pressure for at least 20 seconds along the entire length of the mount, especially at the front and back edges of the mount to prevent peeling. Step 4: DO NOT USE THE MOUNT FOR AT LEAST 24 HOURS!!! Adhesive bond strength will increase after application. If the ambient temperature is below 70℉ (21℃) wait up to 72 hours before using the mount. If the mount starts to peel at the edges, applying heat with a hair dryer or low powered heat gun for a few seconds may help. Do this at your own risk. We are not responsible for any damage to the mount or your vehicle from overheating the adhesive, mount, or mounting surface! If you have any questions, comments, or concerns, please contact us using the contact form found on our website (camberwell-intl.com/pages/contact-us). Be sure to include your order number when contacting us. For more information on installation, check out 3M's Application Guide here. We are not responsible for any damages caused by improper installation or use of this product. *** Please note that this product is ONLY the magnet. This is intended to be an upgrade to those who have already purchased a controller holder, so you will not receive the metal plate that is enclosed in the holder.

Magnets for Camberwell Controller Holders

Features Prevent swirls, scratches, and clear coat damage Internal mesh barrier blocks grit and debris while allowing full soap flow through the microfiber Machine washable and reusable Lightweight, compact, easy to keep in your trunk

Camberwell Car Wash Microfiber Brush Cover

Most Popular Mounts & Cases 

Please check your current manifold plate size before ordering! The airlift manifolds currently have 2 different size plates depending on the age of your manifold. New Size - 2.33" x 4.33" Old Size - 2.00" x 4.33" If you ordered your Airlift manifold IN 2021 (or later) you likely have the new size plate but please double check before ordering! If you ordered your Airlift manifold BEFORE 2021, you probably have the old size manifold plate. Check out all of our other manifold plates here!

Airlift 3P/3H Manifold Plate - Mirror Finish

These Airlift 3P/3H controller skins are made from high quality vinyl that's made to withstand high heat and UV exposure! These controller skins are precut and come with transfer tape to assist with installation. We also include prep wipes to clean the controller contact surface and ensure proper vinyl adhesion. The Red controller skins match our Candy Apple Red holders the best *** We are not able to accept returns or issue refunds due to improper placement or installation. Please follow the installation instructions to ensure proper placement.

Airlift 3P Controller Skin

These cable guides slide into interior panel gaps to route you phone charging cable, airlift controller wires, or radar detector wires out of your way and clean up your interior! No more wires running across your radio, getting in the way of your shifter, or moving around freely while you're driving! Now available for 3P and Autopilot V2 controllers! + Also works with iPhone and Android phone cables (3-3.5 mm diameter) and Airlift Autopilot V2 cables (4.5 mm diameter) + Choose from 3, 5, or 10 guide clips *Standard size guides have a width around 2 mm and fit tight gaps. *3P size intended for use with 3 to 3.5 mm cables, which is the average size of a phone charging cable. guides are very flexible and can accommodate slightly larger or smaller cables.

Cable Guides

Top products

*NEW 2025 - Dash Mount V3

Airlift magnetic controller Cases with Mount

Airlift controller case & mount review by @cforester_5.0

To see all of the color patterns, check out this video on our YouTube channel! Features include: High-density LEDs with 361 different colors and patterns! Power via USB type A Compatible with our existing magnetic mounts Bluetooth LED driver is now standard! The LEDs are powered by USB type A, which should work with most car phone chargers or integrated USB power outlets in your car. The length of the cable measured from the bottom of the case to the USB plug is about 3 feet (0.91 meters). The current mount options are the premium vent magnet or none, so if you would like the dash mount -> select "none" for the mount option and add the Dash mount (found here) to your cart before ordering. As we add more custom magnetic mounts to our product line, such as the MK4 Golf/Jetta/GTI/GLI accessory switch magnetic mount, you will follow the same process to order those together (ie. select "none" for the mount option on this product and add the custom mount to your cart separately before you check out).

Airlift LED Controller Case & Mount

To see all of the color patterns, check out this video on our YouTube channel! Features include: High-density LEDs with 361 different colors and patterns! Power via USB type A Compatible with our existing magnetic mounts BATTERIES ARE INCLUDED for the LED remote! The LEDs are powered by USB type A, which should work with most car phone chargers or integrated USB power outlets in your car. The length of the cable measured from the bottom of the case to the USB plug is about 4 feet (1.22 meters). The current mount options are the premium vent magnet or none, so if you would like the dash mount -> select "none" for the mount option and add the Dash mount (found here) to your cart before ordering. As we add more custom magnetic mounts to our product line, such as the MK4 Golf/Jetta/GTI/GLI accessory switch magnetic mount, you will follow the same process to order those together (ie. select "none" for the mount option on this product and add the custom mount to your cart separately before you check out).

Grinds LED Controller Case & Mount

Airtekk LED Controller Case & Mount

All LED Cases & Mounts

Accuair Touchpad + Cases with Mount

Please check your current manifold plate size before ordering! The airlift manifolds currently have 2 different size plates depending on the age of your manifold. YES! These are made of REAL CARBON FIBER!!! New Size - 2.33" x 4.33" Old Size - 2.00" x 4.33" If you ordered your Airlift manifold IN 2021 (or later) you likely have the new size plate but please double check before ordering! If you ordered your Airlift manifold BEFORE 2021, you probably have the old size manifold plate. Check out all of our other manifold plates here!

Airlift 3P Carbon Fiber Manifold Plate

Please check your current manifold plate size before ordering! The Airlift manifolds currently have 2 different size plates depending on the age of your manifold. New Size - 2.33" x 4.33" Old Size - 2.00" x 4.33" If you ordered your Airlift manifold IN 2021 (or later) you likely have the new size plate but please double check before ordering! If you ordered your Airlift manifold BEFORE 2021, you probably have the old size manifold plate. Check out all of our other manifold plates here!

Airlift 3P/3H Manifold Plate - Wolfsburg Plaid

Airlift 3P/3H Manifold Plate - Standard

Airlift 3P Manifold Plate - Hardwood

Airlift Manifold Plates

Contact Us

@Camberwell.intl

Enjoy 30 days of Hulu for FREE

Claim 10 free meals* from HelloFresh

Get 60% off Sitewide

Sip your way to stronger health with 30% off at ARMRA

Save 10% at Omnilux LED

Save 10% on Ritual Multivitamins Subscriptions

You've scored 50% OFF Factor 🤤

Join now and get 50% off a Club membership

Get your first box FREE with Curology!

Claim your $20 bonus with Acorns

Sign up for Headspace Today and get a 14 day free trial!

Get AAA membership for half the price!

Get 30¢/gal cash back on gas at major stations

Get 15% off at Equip Foods

20% Off the at FabFitFun with code INSIDER20

Get 80% off your first order when signing up to be a VIP!

Get 15% off for cleaner skin at CLEARSTEM

Get your first box FREE with Agency!

50% off + Free Shipping at Purple Carrot!

Power Up with Daily Harvest's High-Protein Smoothies

Save $100 with Gobble

Save 10% on your First Maev Order!

15% off your favorite non-alcoholic spirits at The Zero Proof

10% off JLab’s award‑winning audio gear

Get help with or without insurance. Use code SPACE80 for $80 off.

Start speaking a new language in just 3 weeks