Showing 32 open source projects for "usb monitor"

View related business solutions
  • $300 in Free Credit Towards Top Cloud Services Icon
    $300 in Free Credit Towards Top Cloud Services

    Build VMs, containers, AI, databases, storage—all in one place.

    Start your project in minutes. After credits run out, 20+ products include free monthly usage. Only pay when you're ready to scale.
    Get Started
  • Gemini 3 and 200+ AI Models on One Platform Icon
    Gemini 3 and 200+ AI Models on One Platform

    Access Google's best plus Claude, Llama, and Gemma. Fine-tune and deploy from one console.

    Build generative AI apps with Vertex AI. Switch between models without switching platforms.
    Start Free
  • 1
    FreeMDU

    FreeMDU

    Open hardware and software tools for communicating with Miele

    FreeMDU is an open-source toolkit that provides both hardware and software solutions for communicating with Miele appliances through their often overlooked optical diagnostic interface, effectively offering an accessible alternative to the proprietary Miele Diagnostic Utility used by service technicians. This project includes reverse-engineered protocol support, a terminal user interface for diagnostics, and firmware that can act as a USB-UART bridge or standalone communication adapter for home automation systems. Developers and tinkerers can use FreeMDU to read diagnostic codes, monitor appliance internal states, and even integrate device feedback into platforms like Home Assistant using MQTT, making it valuable for repair, automation, and monitoring applications. ...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 2
    Seri-Serial Monitor

    Seri-Serial Monitor

    A Serial Terminal in Command Line

    A command-line based serial terminal written in Python. This tool allows you to communicate with devices over a serial port (e.g. Arduino, ESP, Pi Pico, etc.) directly from your Windows command prompt or terminal.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 3
    Modem Bridge 2k26  - (USB_to_RS232)

    Modem Bridge 2k26 - (USB_to_RS232)

    Internet Connectivity on Retro Computer Hardware!

    Bridging the gap between the Atari 8-bit era and modern networks. ModemBridge is a lightweight, cross-platform system tray application designed to seamlessly bridge modern network connections with legacy BBS environments. Built from the ground up using Qt 6, it takes the headache out of connecting retro hardware to modern SSH and Telnet-based bulletin board systems. More than just a simple tunnel, ModemBridge acts as a full-fledged AT command parser and multi-port connection manager,...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 4
    Network Security Toolkit (NST)

    Network Security Toolkit (NST)

    A network security analysis and monitoring toolkit Linux distribution.

    Network Security Toolkit (NST) is a bootable ISO image (Live USB Flash Drive) based on Fedora 42 providing easy access to best-of-breed Open Source Network Security Applications and should run on most x86_64 systems. The main intent of developing this toolkit was to provide the security professional and network administrator with a comprehensive set of Open Source Network Security Tools. The majority of tools published in the article: Top 125 Security Tools by INSECURE.ORG are available...
    Leader badge
    Downloads: 173 This Week
    Last Update:
    See Project
  • AI-powered service management for IT and enterprise teams Icon
    AI-powered service management for IT and enterprise teams

    Enterprise-grade ITSM, for every business

    Give your IT, operations, and business teams the ability to deliver exceptional services—without the complexity. Maximize operational efficiency with refreshingly simple, AI-powered Freshservice.
    Try it Free
  • 5
    VitalSignsCapture

    VitalSignsCapture

    Download data from medical device interfaces in ICU & Anaesthesia

    A C# .NET app to download or capture data from several medical device interfaces such as Datex AS3 S/5 Anesthesia, Philips Intellivue, GE Dash, Mindray HL7, Spacelabs, Draeger Infinity, Draeger HL7 patient monitors, GE Engstrom, Draeger (MedibusX), Maquet (Servo-i, Servo-U & Flow-i), Puritan Bennett ventilators, Covidien BIS Vista cerebral monitor, Fresenius Agilia, Alaris Carefusion, BBraun Spacecom syringe and volumetric pumps, Roche Cobas ASTM ABG analyzers. Requires Visual Studio 2022,...
    Leader badge
    Downloads: 41 This Week
    Last Update:
    See Project
  • 6
    Chromis POS

    Chromis POS

    Chromis POS, the new evolving face for your point of sale needs

    Are you looking for POS software for your outlet? Chromis Pos is a feature rich Point of Sale software. Which will run a variety of hardware, the only requirement is that it must be capable of running Java 11 Chromis Pos seperates the till and backoffice functions into individual applications. The latest version includes a number of new features Chromis pos has a small team of people who are always willing to assist with any issues Features
    Leader badge
    Downloads: 395 This Week
    Last Update:
    See Project
  • 7
    Skywave Linux

    Skywave Linux

    Global Software Defined Radio at Your Fingertips

    Updated 2026/01/24: Turn your PC into the ultimate shortwave radio. Skywave Linux is an X86, 64 bit live environment configured for accessing internet accessible software defined radio receivers. With this operating system, you may tune in popular stations or amateur radio, aeronautical, maritime, or other signals received at remote internet servers around the world. For a live map of the best KiwiSDR and WebSDR servers and a nice "click to tune" interface, Use the installed SDR-Map...
    Leader badge
    Downloads: 83 This Week
    Last Update:
    See Project
  • 8
    DroidScreen-USB

    DroidScreen-USB

    DroidScreen USB Control multiple Android device at same time

    DroidScreen USB its project help you control and monitor multiple Android device at same time . its so easy to use , just run and have fun . The program provides easy and convenient control of connected devices, from connecting and disconnecting operations to controlling each phone’s screen using the mouse and keyboard
    Downloads: 38 This Week
    Last Update:
    See Project
  • 9
    Orchid Studio is a beautiful full multimedia operating system that can edit sound, video, and photographs on a 10 year old laptop with just 4GB of memory. Although designed for 10 year old and newer 64-bit computers that are unable to upgrade to windows 11, it excels on newer systems. It works great on multi-monitor and ultra wide screen monitor setups. Orchid Studio can be run live from a USB drive, however is intended to be installed on a solid state drive or hard drive. Orchid Studio is designed as a single user setup where the “admin” user does not require passwords for updates, installing software, and performing most administrative tasks. ...
    Downloads: 0 This Week
    Last Update:
    See Project
  • Earn up to 16% annual interest with Nexo. Icon
    Earn up to 16% annual interest with Nexo.

    Access competitive interest rates on your digital assets.

    Generate interest, borrow against your crypto, and trade a range of cryptocurrencies — all in one platform. Geographic restrictions, eligibility, and terms apply.
    Get started with Nexo.
  • 10

    MC 6800 Emulator for Teensy 4

    6800 Emulator runs on Teensy 4 processor

    6800/ET-3400 Emulator, designed for the Teensy 4.0/4.1 processors. Build this with the Arduino IDE 2.0. Full Source and readme included in archive. Programs written in 6800 assembly can be run in the emulator. It supports two modes of operation, an internal monitor program and a mode that emulates the Heathkit ET3400 (and ET-6800) microprocessor trainers. Motorola released the MC6800 chip in 1974. It was a source of inspiration for the designers of the more popular (and cheaper) 6502 chip...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 11

    g7ctrl

    Managing daemon for GM7 Xtreme GPS Tracker

    This software, consisting of a daemon and a command shell, is meant to be used together with the Xtreme GM7 GPS tracker to help simplify its management and to make it possible to monitor alerts sent by the tracker. The software is intended to be run as a GNU/Linux service that always runs in the background and can be used to both receive location updates from a remote tracker as well as configuring the tracker (over both USB and a GPRS link to the device). All received events are stored in a database and the daemon supports export of events to GPX, KML, CSV format. ...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 12
    MiniMon

    MiniMon

    Read and Log CO2, Temperature, and Humidity from a CO2 Monitor Device

    MiniMon 1.1 released! MiniMon can now also be used as a device under GeigerLog: https://sourceforge.net/projects/geigerlog/ CO2 Monitor is a small, low-cost (~65€) device, which is advertised as a 'bad-air' monitor for home and office, which it indicates by green, yellow, and red LEDs, and a small numeric LCD display. MiniMon is a simple Python3 program, which can read the data from this device via a USB connection, show them on the computer screen, and log them to disk, including a timestamp. ...
    Downloads: 2 This Week
    Last Update:
    See Project
  • 13
    Unidockynapse CaleucheOS Linux

    Unidockynapse CaleucheOS Linux

    linux for your needs thinking in mine

    Very Important: In the last stage when you proceed to install (after hard-disk configuration) you will found a checkbox that say "transfer personal files and configuration" this checkbox needs to be enabled, otherwise the distribution does not work properly. Password for install : udn USB and DVD installation fixed. for install from usb you need: sudo fdisk -l (for know where is the usb stick, by example sdc) sudo dd if=udn.iso of=/dev/sdc for music creation: Create a playonlinux...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 14
    FOR ZUK Z2 PLUS -PIE ONLY!! 1.Wifi monitor and injection mode support enabled. 2.USB MODEM CDC ACM and Proxmark and similair devices support enabled(*NEW*)
    Downloads: 0 This Week
    Last Update:
    See Project
  • 15
    howmanypeoplearearound

    howmanypeoplearearound

    Count the number of people around you by monitoring wifi signals

    ...Possible uses of howmanypeoplearearound include, monitoring foot traffic in your house with Raspberry Pis, seeing if your roommates are home, etc. There are a number of possible USB WiFi adapters that support monitor mode. Namely you want to find a USB adapter with one of the following chipsets: Atheros AR9271, Ralink RT3070, Ralink RT3572, or Ralink RT5572. You will be prompted for the WiFi adapter to use for scanning. Make sure to use an adapter that supports "monitor" mode. You can modify the scan time, designate the adapter, or modify the output using some command-line options.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 16
    license4j

    license4j

    License4J Library and GUI Tools

    LICENSE4J is a robust licensing library and license server that simplifies software licensing for developers. It allows for easy integration of licensing functionality into Java applications with minimal code. The user-friendly web-based License Manager works seamlessly on both desktop and mobile devices, enhancing accessibility for all users. The Licensing Library is a versatile tool that developers can easily integrate into any Java application. It empowers developers to implement...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 17
    ( pro ping )pinger network alert monitor

    ( pro ping )pinger network alert monitor

    Pinger alert, STATICTICAL TABLES, send EMAILs or SMS by SMS GATEWAY

    Thank you for your DONATIONS for Pinger alert, STATICTICAL TABLES, send EMAILs or SMS by SMS GATEWAY. Look on the tab files, select and download the version of the operating system that you need of this slight textual code that requires no system update. Network monitoring analyzer, network scanner with ping, traceroute and beeper alert and warning mail sender. Capable of scanning IP INFINIT, automatic detection of the source of network interruptions without GUI interface configurations....
    Downloads: 1 This Week
    Last Update:
    See Project
  • 18
    LSD

    LSD

    LSD stands for Linux Storage Devices

    LSD - basic tools for Linux to monitor state of CPU, HDD/SSD and USB/COM ports(in nearest feature). It can provide you the same information which you can find looking into root files of Linux OS, but if you want to do it much faster just use LSD. Note: S.M.A.R.T won't run until you run LSD as root. You need to have installed smartctl on your PC to use this option.
    Downloads: 0 This Week
    Last Update:
    See Project
  • 19
    Infinity Virtualization Platform

    Infinity Virtualization Platform

    A virtual infrastructure without the dedicated physical infrastructure

    Infinity saves time and money by providing users with a virtual infrastructure without the need to buy and manage dedicated hardware. The Infinity virtualization platform gives users centralized management of their virtual machines (VMs), but unlike traditional virtualization solutions, Hosts running VMs can be any computer. Computer workstations and servers which are running Windows, Mac, Linux, BSD, Unix or no OS at all can be used to host VMs alongside their current applications. VMs...
    Downloads: 4 This Week
    Last Update:
    See Project
  • 20
    Xiaopan OS

    Xiaopan OS

    Easy to use pentesting distribution for wireless security enthusiasts

    Xiaopan OS is an easy to use software package for beginners and experts that includes a number of advanced hacking tools to penetrate WPA / WPA2 / WPS / WEP wireless networks. Based on the Tiny Core Linux (TCL) operating system (OS), it has a slick graphical user interface (GUI) requiring no need for typing Linux commands. Xiaopan OS is Windows, Mac and Linux compatible and users can simply install and boot this ~70mb OS through a USB pen drive or in a virtual machine (VM) environment....
    Downloads: 62 This Week
    Last Update:
    See Project
  • 21

    HEYMon

    Software, Server and Application Monitor

    HEYMon is a Software, Server and Application Monitoring platform. HEYMon allows monitoring requests using SQL! You can now query your enterprise to gather real-time details. HEYMon can monitor anything that is important for you: - Query a database: Look for patterns, perform queries, or generate statistics. - Parse a log file: Look for errors, or other alert conditions and statistics. - Read server metrics: Available RAM, Diskspace, processes, Windows Services - Read Windows Event...
    Downloads: 0 This Week
    Last Update:
    See Project
  • 22

    Handy TCP/IP Server/Client Tools

    Various TCP/IP servers, clients and network management tools

    IPtools is an all in one package that includes various TCP/IP tools. Server: - FTP - TFTP - Syslog - Web - Remote Command - General UDP server - Multicast server Client utilities: - Multicast client - TFTP client Starting on version 0.2.0, a powerful network connection tools UBridge is added, it can bridge: - VXLAN (newly released) - UDP sessions - NIC card of the PC - Connections to Cisco Router Simulator "GNS3/dynamips" and H3C Router Simulator...
    Downloads: 5 This Week
    Last Update:
    See Project
  • 23

    Raspi - Home Server

    Un piccolo server domestico con il Raspberry

    Immagine per il Raspberry PI che implementa un server domestico per i seguenti servizi: NAS (collegando dischi USB alle porte del Raspberry) Print Server Media Server (DLNA) Scanner di rete (Permette l'accesso via rete ad uno scanner) Inoltre è installata l'interfaccia web RPI-Monitor che consente di visualizzare via web lo stato del dispositivo. Tramite interfaccia web è possibile gestire: Amministrazione del dispositivo (tramite WEBMIN) Stampanti (Tramite CUPS) Scanner (Tramite PHP Server Scanner) Accesso in ssh (tramite shell in a box) Caratteristica interessante è il fatto che è un server headless (quindi puo' essere operativo senza alcun monitor e tastiera). ...
    Leader badge
    Downloads: 107 This Week
    Last Update:
    See Project
  • 24

    electricowl

    OWL Energy monitor data logging/display tool

    Log data from your OWL energy monitor on your PC via a USB connect /CM160 device
    Downloads: 2 This Week
    Last Update:
    See Project
  • 25
    Okapi Viewer

    Okapi Viewer

    Java app used for monitoring Okapi Solar Furnace fan control systems

    The Okapi Viewer app is intended for use by owners of Okapi solar air heater fan control systems. It is used to monitor data (inlet, outlet, ambient temperatures and fan speeds) broadcast by the Okapi systems that use the optional Bluetooth transceiver module. The app can also be connected to "hacked" Okapi systems by wiring a PL2303 USB adapter (or similar) to the "hacked" Okapi.
    Downloads: 0 This Week
    Last Update:
    See Project
  • Previous
  • You're on page 1
  • 2
  • Next
MongoDB Logo MongoDB