Hostname: page-component-77f85d65b8-pkds5 Total loading time: 0 Render date: 2026-03-30T01:27:51.912Z Has data issue: false hasContentIssue false
  • English
  • Français

Workspace and singularity analysis of a 3-DOF planar parallel manipulator with actuation redundancy

Published online by Cambridge University Press:  01 January 2009

Jinsong Wang ,
Jun Wu ,
Tiemin Li  and
Xinjun Liu
Jinsong Wang
Affiliation:
Institute of Manufacturing Engineering, Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, People's Republic of China
Jun Wu*
Affiliation:
Institute of Manufacturing Engineering, Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, People's Republic of China
Tiemin Li
Affiliation:
Institute of Manufacturing Engineering, Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, People's Republic of China
Xinjun Liu
Affiliation:
Institute of Manufacturing Engineering, Department of Precision Instruments and Mechanology, Tsinghua University, Beijing 100084, People's Republic of China
*
*Corresponding author. E-mail: wu-j03@mails.tsinghua.edu.cn.
Get access Rights & Permissions [Opens in a new window]

Summary

This paper deals with the position workspace, orientation workspace, and singularity of a 3-degree-of-freedom (DOF) planar parallel manipulator with actuation redundancy, which is created by introducing a redundant link with active actuator to a 3-DOF nonredundant parallel manipulator. Based on the kinematic analysis, the position workspace and orientation workspace of the redundantly actuated parallel manipulator and its corresponding nonredundant parallel manipulator are analyzed, respectively. In the singularity analysis phase, the relationship between the generalized input velocity and the generalized output velocity is researched on the basis of the theory of singular value decomposition. Then a method to investigate the singularity of parallel manipulators is presented, which is used to determine the singularity of the redundantly actuated parallel manipulator. In contrast to the corresponding nonredundant parallel manipulator, the redundant one has larger orientation workspace and less singular configurations. The redundantly actuated parallel manipulator is incorporated into a 4-DOF hybrid machine tool which also includes a feed worktable to demonstrate its applicability.

Keywords

Parallel manipulatorActuation redundancyOrientation workspaceSingularity

Information

Type
Article
Information
Robotica , Volume 27 , Issue 1 , January 2009 , pp. 51 - 57
Copyright
Copyright © Cambridge University Press 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1.Gosselin, C. M. and Angeles, J., “Singularity analysis of closed-loop kinematic chains,” IEEE Trans. Robot. Autom. 6 (3), 281–290 (1990).CrossRefGoogle Scholar
2.Wu, J., Wang, J., Li, T. and Wang, L., “Analysis and application of a 2-DOF planar parallel mechanism,” J. Mech. Design 129 (4), 434–437 (2007).CrossRefGoogle Scholar
3.Cheng, H., Yiu, Y. K. and Li, Z. X., “Dynamics and control of redundantly actuated parallel manipulators,” IEEE/ASME Trans. Mechatron. 8 (4), 483–491 (2003).CrossRefGoogle Scholar
4.Takeda, Y. and Ichikawa, K., “An in-parallel actuated manipulator with redundant actuators for gross and fine motions,” Proceedings of the IEEE International Conference on Robotics and Automation (2003) pp. 749–754.Google Scholar
5.Gao, F., Zhang, X., Zhao, Y. and Wang, H., “A physical model of the solution space and the atlases of the reachable workspaces for 2-DOF parallel plane wrists,” Mech. Mach. Theory 31 (2), 173–184 (1996).Google Scholar
6.Liu, X. J., Wang, J. S. and Pritschow, G., “Kinematics, singularity and workspace of planar 5R symmetrical parallel mechanisms,” Mech. Mach. Theory 41 (2), 145–169 (2006).CrossRefGoogle Scholar
7.Bai, S. P., Teo, M. Y., Ng, W. S. and Sim, C., “Workspace analysis of a parallel manipulator with one redundant dof for skull-base surgery,” IEEE International Conference on Intelligent Robots and Systems (2001) pp. 1694–1699.Google Scholar
8.Bonev, I. A. and Gosselin, C. M., “Analytical determination of the workspace of symmetrical spherical parallel mechanisms,” IEEE Trans. Robot. 22 (5), 1011–1017 (2006).CrossRefGoogle Scholar
9.Zlatanov, D., Fenton, R. G. and Benhabib, B.. “Identification and classification of the singular configurations of mechanisms,” Mech. Mach. Theory 33 (6), 743–760 (1998).CrossRefGoogle Scholar
10.Bonev, I. A., Zlatanov, D. and Gosselin, C. M., “Singularity analysis of 3-DOF planar parallel mechanisms via screw theory,” ASME J. Mech. Design 125 (3), 573–581 (2003).CrossRefGoogle Scholar
11.Liu, G. F., Lou, Y. J. and Li, Z. X., “Singularities of parallel manipulators: A geometric treatment,” IEEE Trans. Robot. Autom. 19 (4), 579–594 (2003).Google Scholar
12.Merlet, J. P., “Redundant parallel manipulators,” Lab. Robot. Autom. 8 (1), 17–24 (1996).3.0.CO;2-#>CrossRefGoogle Scholar