Merged
Conversation
Add FT90X and FT93X to the list of devices in tusb_option.h. 1700 for FT90x and 1701 for FT93x. Set endpoint attributes for FT90x and FT93x in dcd_attr.h. Add FT90x routines for USB device in src/portable/bridgetek/ft90x/dcd_ft90x.c The location for hardware header files and libraries is hw/mcu/bridgetek/ft90x/hardware. There are no files in the repository, but files will be linked as a submodule in the future. The required files can be copied from or linked to the location "C:/Program Files(x86)/Bridgetek/FT9xx Toolchain/Toolchain/hardware" once the toolchain is installed. Makefile for the MM900EV1B board for developing with an FT900 device is present. Use "BOARD=mm900ev1b".
Add in endpoint definitions for the Bridgetek devices in usb_descriptors.c and allow high speed in tusb_config.h.
…covered by the same SDK and src/portable code. Board makefile includes __FT900__ macro for FT90x and __FT930__ macro for boards with FT93x.
Add Bridgetek FT90x SDK as submodule.
Update submodule for FT90X SDK to point to the v2.5.0 release code currently in main.
Merge upstream changes and expand example support to hid examples.
This reverts commit fa06bd0.
…k). Default to ft90x-sdk instead of pre-built library.
Contributor
Author
|
Correct, we don't currently have linux tools available. The FT9xx Toolchain has the Windows gcc compiler (prefix ft32-elf-). |
hathach
approved these changes
Jan 17, 2022
Owner
hathach
left a comment
hathach
left a comment
There was a problem hiding this comment.
sorry for late response. I don't have any ft90x board to verify the PR. We will merge this as it is and make any correct/update later on. If possible please add ft90x to ci build to prevent any future changes would break the build
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
2 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
Describe the PR
Add support for the Bridgetek FT90x and FT93x devices.
The FT90x and FT93x series are complete System-On-Chip 32-bit RISC microcontrollers for embedded applications featuring a high level of integration and low power consumption.
Additional context
Documentation is available at https://brtchip.com/ft90x/ and https://brtchip.com/ft93x/
The port requires to be compiled by the GNU ft32-elf- Toolchain which downloaded from http://brtchip.com/ft9xx-toolchain/
Currently the DCD code is implemented although these devices have a HCD as well.
The BSP for an MM900EVxB is provided. This covers the MM900EV1B, MM900EV2B and MM900EV3B modules. Note that there are no LEDs or buttons on the modules these can be added using the CN3 connector.