Open Source Hardware Platforms

hdparm - get/set ATA/SATA drive parameters under Linux

A Linux port of the OpenBSD/FreeBSD Cryptographic Framework (OCF). This port aims to bring full asynchronous HW/SW crypto acceleration to the Linux kernel, OpenSwan, OpenSSL and applications using DES, 3DES, AES, MD5, SHA, PublicKey, RNGs and more.

Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.

The software package repository for <a href=http://sourceforge.net/projects/fsos>FsOS</a>, including EP80579 drivers, SempSec drivers, linux kernel patches and a lot of porting applications for FsOS

the goal of this project is to build a stack for Lonworks Protocol and device working on this protocol

A replacement firmware distribution for the 3com 3CRADSL72 a.k.a 3com wireless 11g (distributed by Ya.com) and its identical twin, the SMC7804WBRA, with an ucLinux kernel based system and associated system tools.

Replacement firmware for the Humax iCord HD, a BCM7403 based dual tuner HDTV settop box with harddisk pvr, already based on linux 2.6.

This project introduces new FPGA architectural tools and Linux OS modifications that aid in supporting Dynamic Partial Reconfiguration (DPR) on FPGAs for concurrent control. It shows that control systems benefit from hardware concurrency, meaning that by moving the control intelligence into hardware, the negative effects inherent to threads and their scheduler are minimized. This leaves software with the role of a high-level administrator rather than an executor, thereby eliminating unnecessary bottlenecks. The tools described in this project enable the hardware engineer to develop DPR-FPGA systems more effectively for rapid control system development. For more information, related papers and user guide, please refer to: - https://sourceforge.net/p/prhardware/wiki/Home/ - http://www2.ensc.sfu.ca/research/iDEA/personel/victor_lesau.htm

SNOW Board is come from [Suck and NO Warranty Board](Well,At least,For alpha version)This board will has Atmel-AT91SAM9261 as MPU,Touch panel as interface.Expansion hardware board can be adding later.uClinux,T-engine,TOPPERS will running on this.Lets Fun

Project SUZAKU, home of software development based on SUZAKU FPGA board

C version of PimucHA for OpenWRT PimucHA : Python integrated multi controllers Home Automation For CM11A, CM15A(CM15Pro), RFXcomRX, RFXtrx433, TellStick Duo, ATI Remote X10 receiver. Next version at https://github.com/domovilam/pimuchad

This is the Linux kernel driver for the stmpe2401 and stmpe2402 GPIO expanders from ST Microelectronics. These i2c chips support up to 24 extra GPIO lines, have 3 programmable PWM outputs, an integrated keypad input, and rotator input controllers.