Open Source Integrated Development Environments (IDE)

Open tool platform for the cost effective rigorous development of dependable complex software systems services. This platform is based on the event-B formal method and provides natural support for refinement and mathematical proof.

An Arduino IDE compatible graphics and fonts library for 32-bit processors. The library is targeted at 32-bit processors, it has been performance-optimized for STM32, ESP8266 and ESP32 types. The library can be loaded using the Arduino IDE's Library Manager. Direct Memory Access (DMA) can be used with the ESP32, RP2040, and STM32 processors to improve rendering performance. "Four wire" SPI and 8 bit parallel interfaces are supported. Due to the lack of GPIO pins, the 8-bit parallel interface is NOT supported on the ESP8266. 8 bit parallel interface TFTs (e.g. UNO format mcufriend shields) can use with the STM32 Nucleo 64/144 range or the UNO format ESP32. ILI9341 and ST7796 SPI-based displays are recommended as starting points for experimenting with this library. The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320-pixel screen.

This library allows you to make the ESP32 act as a Bluetooth Keyboard and control what it does. Compatible with Android. Compatible with Windows. Compatible with Linux. Compatible with MacOS X (not stable, some people have issues, doesn't work with old devices). Compatible with iOS (not stable, some people have issues, doesn't work with old devices). There is also Bluetooth-specific information that you can set (optional): Instead of BleKeyboard bleKeyboard; you can do BleKeyboard bleKeyboard("Bluetooth Device Name", "Bluetooth Device Manufacturer", 100);. (Max length is 15 characters, anything beyond that will be truncated.) By default the battery level will be set to 100%, the device name will be ESP32 Bluetooth Keyboard and the manufacturer will be Espressif. This feature is meant to compensate for some applications and devices that can't handle fast input and will skip letters if too many keys are sent in a small time frame.

Piklab is an integrated development environment for applications based on PIC and dsPIC microcontrollers. The GNU PIC Utilities, SDCC, PICC, PIC30 toolchain, ICD2 debugger, PICkit1, PICkit2, PicStart+, GPSim and most direct programmers are supported.

Eclipse Verilog editor is a plugin for the Eclipse IDE. It provides Verilog(IEEE-1364) and VHDL language specific code viewer, contents outline, code assist etc. It helps coding and debugging in hardware development based on Verilog or VHDL.

Please participate in the SURVEY on rgedit's future: https://www.surveymonkey.com/s/VNMMJMJ your answers are much appreciated! Gedit (Gnome editor, www.gedit.org) plug-in allowing it to become an easy-to-use and yet light-weight IDE for the statistical programming environment, R (www.r-project.org).

Symja - computer algebra language and Java symbolic math library. Moved to https://github.com/axkr/symja_android_library. The Android App can be found at: https://github.com/axkr/symja-example

avrLab is an IDE (integrated development environment) for AVR microcontroller from ATMEL. It includes an editor with syntax highlighting. avrLab includes support for macro assembler (tavrasm and avra) as well as support for accessing the AVR via uisp.

Prithvi Development Studio is BASIC language based IDE for Microchip ® PIC Microcontrollers.

Gravitas is a fully scriptable, real-time 3D gravity simulator.

Verilog processor for Notepad++. Current features: - Instantiate a module - Insert registers/wires from a module - Generate a test bench template - Automatically inserts a default header for a test bench - Insert a clocked always block v1.2.0 now supports ANSI and non-ANSI module declarations. To use this plugin, select the module declaration (including parameter and I/O definitions below for non-ANSI) and click SHIFT-CTRL-C. This selects the module and parses its components. After this, all other functions are available.

PortableLatex is LaTeX without installation; you download and use it straight away, without changing a byte of your system. Plus a complete suite of apps to comfortably edit, view, compile and handle latex or tex projects, glued by some scripting.

The CodeTime platform covers every aspect of parallel software from authoring, through distribution, to run-time. Its goals are: high programmer productivity; write once, run high performance anywhere; and wide acceptance.

FIRSTclipse is a set of plugins for the Eclipse IDE that allows for full development for FIRST entirely inside of Eclipse.

The intentions of this project are as follows: 1; Determine the potential interest level in developing a basic interface for creating models in GAMS (General Algebraic Modeling System). 2; To create a sounding board for what should be added to the exist

This IDE replicates the official lpsolve project IDE made in Delphi. Its author is Juan José Gago Martínez. Project stopped at version 1.2, but now is being revived by Hélio Guilherme, starting with version 1.2.1.

Before year 2045, we want to create a "software development lab" that will allow to write "from scratch" the DNA of a creature, the "content" of it's first cell, and the components of the solution in which it will grow, to simulate it's life.

Galileo-Data Acquisition System is a data acquisition system and development environment for laboratory automation.

Pure Java IDE for brainfuck, which follows the principle of KISS.

IPAT-S is a scenario modeling language. Use it for rapid development of quantitative strategic scenarios for governments, agencies, businesses, etc. using a fast and compact interpreted language. Package includes IPAT Studio development environment.

Direct Manipulation is a concept that is used in user interfaces;However itis a programming and system building concept.Intention Space java/xml framework gathers the concepts and tools to do direct manipulation through Flow and Focus orientation.

JSDAI is a toolkit for STEP (ISO 10303), the STandard for the Exchange of Product Model data, that enables linking of CAD, CAM, PDM, PLM, CAx systems. JSDAI supports the development of Express data models (ISO 10303-11) and their implementation in Java.

JinnIde is a plugin that allows using Jinni Prolog, now also hosted here on this site (with open source license!), within the confines of an IDE integrated in JEdit.

Lean Webkit (QtWebKit) based Browser for Jupyter/IPython notebooks.

+Kontrol3 markası, Nigra ailesine ait Aydınlatma ve Uzaktan Kontrol Sistemi cihazlarının ayarlarını yapabileceğiniz, sadeleştirilmiş bir programdır.